NEUMANN ( ノイマン ) が、驚異の低域性能と卓越の解像度を誇る、DSPコントロールによる2ウェイパワードモニター「KH 150 EU/KR」を発売します。
KH 150 のホワイトモデルと、ST 2110、ST 2022-7リダンダンシー、RAVENNAなどの放送規格に完全に準拠したリダンダントAES67オーディオネットワークポートを内蔵した「KH 150 AES67」もラインナップに追加されました。なお、KH 150 AES67はDANTE®が生成したAES67ネットワークストリームに対応しています。

KH 150 は、KH シリーズのギャップを埋めるだけでなく、最新モデルに期待されるように DSP 搭載し高性能を兼ね備えた新モデルです。3 年の歳月をかけて開発した新開発の 6.5 インチ・ウーファーは、現在市販されているどのモデルよりも高い再生精度を誇ります。20 リットルのバスレフ型キャビネットを採用した KH 150 は、最大 SPL 118dB(1m)、39Hz までの重低音レスポンスを実現します。

NEUMANN ならではの精度、驚異の低域性能、比類なきパワー
KH 150 は、パワフルな 2 ウェイパワードのスタジオモニターで、リファレンスクラスのパフォーマンスを誇ります。バスレフキャビネットに搭載された 6.5”ウーファーは、驚異的な低域性能と優れた最大 SPL、変わらぬ明瞭度を発揮。DSP コントロールによるエレクトロニクスが優れた線形位相応答を実現するほか、Neumann の革新的な MA 1 自動モニターアライメントにより、どんな部屋でも最適なキャリブレーションを実現します。
耳で聴いたとおりに再現
KH 150 は、Neumann のすべてのスタジオモニターと同じ哲学に則って開発されました。最高のリニアリティ、超低歪み、不要な色付けをせず、あらゆる音響環境への完璧な適応を実現するスピーカーです。音楽のあらゆるニュアンスを耳で聴きとることができ、ミキシングもアイデアさえ決まれば実作業は驚くほどスピーディかつ容易です。創造性も比肩するものがありません。「確かに素晴らしいサウンドだけど、本当にこれで十分だろうか。ボーカルが明るすぎないだろうか、歯擦音がうるさくないだろうか。低音が目立ちすぎないだろうか」あらゆる疑問に、KH 150 は間違いなく答えてくれます。

特長
- 驚異の低域性能と卓越の解像度を誇る、DSP コントロールによる 2 ウェイパワードモニター
- リニアな周波数と位相応答
- DSP エンジンによりパフォーマンスがさらに向上し、どんな部屋でも自動アライメントを実現
- 39Hz の驚異的な低域性能と優れた最大 SPL
- アナログ/デジタル(S/PDIF)入力
- バリエーション (通常版 / AES 67)とカラー (グレー / ホワイト)から選択可能(カラー版は後日公開)
仕様
| Free field frequency response ±6 dB | 36 Hz … 21 kHz |
| Free field frequency response ±3 dB | 39 Hz … 20.4 kHz |
| Pass band free field frequency response | 42 Hz … 20 kHz, ±1.25 dB |
| Free field frequency linearity deviation between 100 Hz and 10 kHz | ±0.8 dB |
| Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) | <20 dB(A) SPL |
| Sine wave output with a THD < 0.5 % at 1 m in half space | 95 dB SPL (>75 Hz) |
| Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) | 118.7 dB SPL |
| Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) | 112.7 dB SPL |
| Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) | 107.5 dB SPL |
| Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions | 108 dB(C) SPL |
| Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range) | 100 dB(C) SPL |
| Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer) | 106 dB(C) SPL |
| Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range) | 88 / 94 dB(C) SPL |
| Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer) | 88 / 94 dB(C) SPL |
| Dolby D.A.R.D.T. Max SPL fullrange | 114 dB |
| Dolby D.A.R.D.T. Max SPL bass managed | 120 dB |
| Recommended Listening Distance | 1.0 … 2.5 m; (3’… 8′) |
| Feasible Listening Distance | 0.75 … 6.0 m; (2’6″… 18′) |
| Acoustic principle | Bassreflex, Ports at the front |
| Analog input(s) | XLR: analog electronically balanced |
| Analog input impedance | 24 kOhms |
| Max. input level | 24 dBu for 94 dB SPL setting; +14 dBu for 100 dB SPL setting; +9 dBu for 108 dB SPL setting; -1 dBu for 114 dB SPL setting |
| Common mode rejection ratio (CMRR) | >56 dB @ 15kHz |
| Volume control | via MA 1 software |
| Volume control range; resolution | 0 … -∞ dB; 0.1 dB |
| Analog dynamic range; THD+N | 118 dB, A-weighted, 90 dB |
| Signal routing modes | analog, S/PDIF L, S/PDIF R, S/PDIF mono |
| Digital input(s) | RCA (75 Ω): S/PDIF |
| Digital output(s) | RCA (75 Ω): S/PDIF |
| Max. Input Level; pk-pk, unbalanced / balanced | 1.2 V |
| Digital converter: resolution; design | 24 Bit |
| Digital converter: sampling rate | 32 kHz..200 kHz |
| Digital internal sampling rate | 48 kHz |
| Output sample rate | identical to input sample rate |
| Latency ADA / DA | Analog Input: 2.6 ms; SPDIF Input: 2.1 ms |
| Delay: User adjustable delay range | 0 … 120 ms |
| Delay: Resolution: time; distance | 20.8 µs |
| Delay: Max. frames Audio-video synchronisation (lip sync) | 0 … 120 ms for TOF=0ms, depends on APP implementation |
| Delay: Time-of-flight maximum distance | 0 … 120 ms for lipsync=0ms, depends on APP implementation |
| Transport/storage conditions | -25° C to +60° C (-13° F to 140° F); <90% RH; non-condensing |
| Input gain control (sensitivity) | 0 dB … -15 dB |
| Output level control (output level in 1 m based on 0 dBu input level) | 94; 100; 108; 114 dB SPL |
| Equalization: Bass | 0; -2; -4; -6 dB |
| Equalization: Low-Mid | 0; -2; -4; -6 dB |
| Equalization: Treble | #ERROR! |
| Input selector | Analog; S/PDIF L; S/PDIF R; Mono |
| Ground Lift | Yes |
| Control | Local; Network |
| Mains Switch | Yes |
| Mains Voltage Select | Universal Power Supply 100 V~ … 240 V~ |
| Controller design | Digital; active |
| Crossover frequency | 1700 Hz |
| Crossover slope | 24 dB / octave |
| Equalization: via Neumann.Control software | No |
| Automatic room calibration via MA 1 | Yes |
| FIR phase correction | Linear phase (105 Hz … 16 kHz; +/- 45°) |
| Protection circuitry | Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers |
| Infrasonic filter: frequency; slope | 38 Hz; 12 dB / octave |
| Remote control | MA 1 software via an RJ45 connector carrying standard IP data |
| Display: On; Normal Operation | Neumann logo “White” |
| Display: Identification | Neumann logo “Rosé” |
| Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute | Neumann logo “Red” |
| Logo Brightness | via MA 1 software |
| Output power woofer amplifier (THD+N with limiter deactivated: 10%) | 145 W |
| Output power tweeter amplifier (THD+N with limiter deactivated: 10%) | 100 W |
| Output power woofer amplifier (THD+N with limiter deactivated: 0.1%) | 120 W |
| Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%) | 80 W |
| Mains Power Supply: input voltage; frequency | 100-240 V; 50/60 Hz |
| Power consumption (230 V / 100 V): Standby | 0.3 W |
| Power consumption (230 V / 100 V): Idle | 15 W |
| Power consumption (230 V / 100 V): Full output | 320 W |
| In-rush current (Peak) | 33 A |
| Standby | automatic, 90 mins (default); user defined in software |
| Cabinet material | Composite polycarbonate front and rear, wooden sleeve |
| Cabinet surface finish; color (front / back) | Painted; metallic anthracite (RAL 7021) / Black (RAL 9005) |
| Operating conditions | +10° C to +40° C (+50° F to +104° F); <75% RH, non-condensing |
| Woofer | 165 mm; (6.5″) with protecting black metal grille |
| Tweeter | 25 mm; (1″) with protecting black metal grille |
| Mounting points | 2 x M6 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm; (5/8”) |
| Product dimensions (height x width x depth) | 345 x 225 x 273 mm |
| Internal net volume | 12.6 l |
| External net volume | 20.4 l |
| Product weight | 8.0 kg |
発売日
KH 150 EU/KR:2023年2月16日
KH 150 W, KH 150 AES67:2024年2月6日(火)
販売価格
KH 150 EU/KR
¥275,000(税込)
JANコード:4044155257090

KH 150 W
¥275,000(税込)
JANコード:4044155257137

KH 150 AES67
¥319,000(税込)
JANコード:4044155257144

KH 150 W AES67
¥319,000(税込)
JANコード:4044155257151






注目点